คุณยังไม่มีสินค้าในรถเข็น

ติดต่อสอบถาม

02-955-5495-6, 092-456-5616

ขอใบเสนอราคา

Request for Quotation

LINE ID

@intact

FB Messenger

intactpacific
ESD Flat Vacuum Cup Series
ESD (coated) Compact Key Board With Touch Pad ESD (coated) Compact Key Board With Touch Pad

ESD (coated) Compact Key Board With Touch Pad

รหัสสินค้า: ESD (coated) Compact Key Board With Touch Pad

สถานะของสินค้า : สินค้าพร้อมส่ง

0 บาท

รายละเอียดโดยย่อ

ESD (coated) Compact Key Board With Touch Pad

 

ESD (coated) Compact Key Board With Touch Pad

 Product Name  ESD (coated) Compact Key Board With Touch Pad
 Product Number  ESD/C-KBTP31111-5
 Product Size  31cm X 11cm X 1.5 cm
 Product Weight  273 gram
 Product USB Cable Length  145 cm
 Product Colour  Black
 Product Material  ABS Plastic With Coated ESD Surface
 Product Application  Clean Room, Computer Room, Electronic Production and assembly, Quality Control Lab, Surgary Floor
 Product Manufacturibg Warranty (Key Board)  1 Year
 Product Surface Warranty (ESD Coating)  1  Year (Surface Coating Is Permanent With Condition And Subject To Recommened Procedure)

 

Physical Properties

 Typical General Characteristics  Inspection Method  Value
 Appearance    Solid Black ABS Plastic               
 Density  ISO 1183-1 A                                   Approx. 1.04 g/c
 Melt Flow  DIN ISO 815-B  18-23 g/10 min

 

Mechanical Properties

 Typical General Characteristics  Inspection Method  Value
 Hardness Rockwell R  DIN 53505                                        103 - 112                                      
 Tensile Strength  DIN 53504 S 1                            42.5 - 44.8 MPa
 Elongation At Break  DIN 53504 S 1  23-25 %
 Flexural Modulus  D790 - 03  2.25 - 2.28 GPa
 Flexural Yield Strength  DIN 53504 S 1  60.6 - 73.1 MPa

 

Electrical Properties 

 Typical General Characteristics            Inspection Method                        Value                                       
 Arc Resistance   ASTM D 2132                                                   120 sec                                                       
 Comparative Tracking Index                          IEC 60601                         600V                                    
 Hot Wire Ignition , HWI  IEC 60692-1  15 sec
 High Amp Arc Ignition , HAI  IEC 60692-1  120 arcs
 High Voltage Arc-Tracking Rate, HVTR   IEC 60692-1  25mm/min

 

Thermal Properties 

 Typical General Characteristics  Inspection Method  Value
 Maximum Service Temperature                DIN ISO 815-B                                             88-89°C                                                 
 Deflection Temperature at 1.8 MPa    DIN ISO 815-B                                88-89°C  
 Vicat Softening Point  DIN ISO 815-B  100°C
 Flammability, UL94  UL 1715  HB Grade Count = 3

  

Resistity Properties on Key Board Surface

 Typical General Characteristics  Inspection Method  Value
 Surface Coat                                                      Polymer Crystal Clear ESD        
 Surface Resistivity  A400 Resistivity Checker                  10p6 - 10pΩ  
 Electrostatic Feild Voltage  A400 Static Feild Meter  <50 VOLT/1Sec

 

 Versatile, ESD coating that adheres to metal, plastic, and most other surface.

 Ideal for ESD safe environment requirement application.

  • Rugged static dissipative coating
  • Non ozone depleting
  • Humidity independent
  • Surface resistivity 10^6 - 10^9 Ω  
  • Electrostatic field voltage < 50 VOLT/1sec
  • Coat adhesive temperature  resistance up to 155°C  

 

PRODUCT COATING METHODOLOGY

  • De-dusting And De-moisturize
    • Purpose to remove dirt , grease and moisture from key board surface.
  • Setting Up Of Polymer Clear ESD Coating Fluid Sprayer. 
    • To adjust adequate volume of Polymer Clear ESD Coating Flurd to ensure adequate volume to target area.
    • To adjust adequate sprayer pressure to ensure full coverage sprayed surface.
  • Ultra Violet Curing and Drying
    • 85°C curing to whole key board surface.
    • Purpose to hard bond Polymer ESD Coating to key board surface.
  • QC Check.
    • Surface to surface area checked. ESD reading = 10p- 10p
    • Electrostatic field voltage checked. < 50 VOLT /1 Sec.
  • Packing
    • individual packaging.

Note : Coating process is under moisture control environment.

 

CARE AND CLEANING OF PRODUCT

Warning :

  • Do not use key board under hazard environment, for example oil, chemical, oxides of carbon, nitrogen etc.
  • Do not use sharp or rough object against key board surface.
  • Do not use cleaning detergent, for example kitchen detergent or glass cleaner to clean key board surface.
  • Do not use chemical base cleaner, for example alcohol,thinner,aseton paraffin oil to clean key board surface.

Cleaning :

  • Key board dust off with soft duster or soft brush.
  • Clean and wipe key board with soft cloth.

 

Intact Pacific Co., Ltd., a leading manufacturer and distributor of high quality suction cups for various types of industries.

With more than 10 years of our experience in producing of high quality suction cups, vacuum pads and custom made rubber works for different types of materials with special electrical properties that are suitable for customer requirements e.g. ESD, Anti-Static, Conductive. 

Please do not hesitate to call us for free consultant and we will help to find the right suction cups that is suitable for your work.


MORE INFORMATION:

THAILAND
 
MALAYSIA
 
SINGAPORE
 

เขียนรีวิวสินค้าของคุณเอง

คุณกำลังรีวิว: ESD (coated) Compact Key Board With Touch Pad

คุณจะให้คะแนนสินค้านี้อย่างไร? *

  1 2 3 4 5
คุณภาพ
ราคา
ปริมาณ
expand_less